Installing decorative moldings on a finished ETICS facade seems risky, but it is entirely feasible without stripping or patching the render. The key is surface prep, the right adhesive, and mechanical anchoring where needed. This guide covers everything a contractor or homeowner needs to get it right the first time.
A facade cornice is the single horizontal element that separates a plain rendered wall from a house that reads as architecturally intentional. EPS polystyrene versions weigh almost nothing, resist moisture, and cost 80–90% less than their stone or plaster equivalents. This article explains why the cornice works, how to choose one, and how to install it correctly on an ETICS or bare render system.
Corners are the first place inspectors and buyers look on a renovated facade. EPS quoin corners either confirm a quality job or expose every compromise made during the project. Here is what you need to know before ordering or installing them.
An EPS exterior window sill does more than look good — it actively deflects water, defines the window opening, and integrates cleanly with external wall insulation systems. Skipping it or installing it wrong creates moisture infiltration that degrades both insulation and finish render. This article covers the real function, correct installation sequence, and material comparisons so you make the right call.
An EPS polystyrene door surround transforms a flat entry into a defined architectural focal point for under $300 in materials. The installation requires no specialized tools and bonds permanently to most rendered or brick facades. This article covers profile selection, adhesive systems, and finishing so the result lasts decades.
An EPS polystyrene facade band does two jobs at once: it creates horizontal visual breaks that give a flat wall architectural character, and it protects the substrate at floor-line transitions. At roughly $3–$8 per linear foot installed, it delivers a high return for low structural effort.